Application Library - Analytical Elemental analysis

In this on-line library you can find recent application notes published by LECO. Use the search function to browse available application notes by keywords.

Please note, that LECO has been manufacturing analytical instrumentation since 1936 and many other application notes are available in house. If you need an application note that pertains to your industry, but don’t find it in the library, please contact us.

Here below 20 application documents of the product library containing 221 downloadable docs. Registration on website is required to access to this content.

SC832HT SODA LIME GLASS

This method describes the Carbon/Sulfur analysis of soda lime glass with a high temperature tube furnace without accelerator.Learn more...

CS744 BATTERY PASTE

This application note describes the Sulfur analysis of Battery Paste, Lead Oxide and Lead SulfateLearn more...

CS744 SODA LIME GLASS

This method describes the Carbon/Sulfur analysis of soda lime glass with a high frequency furnaceLearn more...

Determination of Moisture in Flour

In this application note a primary analysis method for moisture in food is described.Learn more...

Determination of Moisture in Feed Products

In this application note a primary analysis method for moisture in feed is described.Learn more...

Wire and ROD Analysis with LECO GDS

In this application note some methods are described that allows a perfect analysis of thin and/or long samples like wired and rods.Learn more...

Nitrogen determination in Fertilizer

Nitrogen determination in liquid and solid fertilizers, like Ammonium Nitrate, Urea or others.Learn more...

Oxygen and Nitrogen Determination in Refractory Metals and Their Alloys

Oxygen and Nitrogen determination in refractory metals like Titanium, Zirconium and othersLearn more...

Carbon and Sulfur Determination in Limestone/Dolomite

Carbon / Sulfur Determination in CaCO3 / Dolomite/ LimestoneLearn more...

Carbon and Sulfur Determination in Limestone/Dolomite

Carbon / Sulfur Determination in CaCO3 / Dolomite/ LimestoneLearn more...

Free Moisture and LOI in Hydrated Lime

TGA 701 Free Moisture and LOI (Loss of ignition) in hydrated lime.Learn more...

Determination of Sulfur in Fertilizers

Sulfur Determination in FertilizersLearn more...

Performance of GDS to Analyze Grey Iron and Other As-Cast Materials

Glow discharge spectrometry (GDS) is capable of analyzing all types of cast irons while other techniques, especially spark-emission spectrometry, commonly struggle in this area. This capability arises from several features of glow discharge sputtering that decidedly differentiate these techniques.Learn more...

Determination of Carbon, Nitrogen, and Sulfur in Plant Tissue

The LECO advanced TruMac CNS instrument can be successfully used to simultaneous analyze of CNS elements content in soil and plant tissues. This application note describes method settings, instrument calibration and testing procedure. Typical results are shown.Learn more...

Thermogravimetric Analysis of Flue Gas Desulfurization (FGD) gypsum

Macro TGA (Thermogravimetric analysis ) is used for quality control and characterization of the FGD gypsum product. This application note describes the method for determination and monitoring of constituents in FGD solids material such as gypsum, calcium sulphite, limestone, free moisture and moisture in hydrates.Learn more...

NEW ! Oxygen and Nitrogen in Solid Iron, Steel, Nickel-Base, and Cobalt-Base Alloys

The LECO ON736 provides a cost-effective and efficient means of simultaneously determining the amount of oxygen and nitrogen in steel, nickel-base, and cobalt-base alloys. The following application note outlines the hardware requirements, system settings, and expected performance of this test.Learn more...

Sulfur Determination in Ultra Low Sulfur Steel, Nickel, and Superalloys

The LECO CS844ES with a detection limit of approximately 0.1 μg of sulfur expands the capability of the combustion technique to levels previously limited to GD-MS. The following application note outlines the settings and steps required to determine ultra-low levels of sulfur in steel, nickel, and superalloys.Learn more...

Determination of Carbon and Sulfur in Cast Iron

The following application note outlines the settings and steps required to determine the carbon and sulfur levels in cast iron with the CS/C/S844 series of elemental analyzers. With its simultaneous carbon and sulfur detection capability and easy-to-use touch-screen interface, the CS844 carbon and sulfur by combustion analyzer makes the perfect addition to any foundry laboratory.Learn more...

Determination of Surface Carbon on Aluminum Sheets/Rods/Wire

The LECO RC612 is a multiphase carbon and moisture determinator specifically designed to differentiate various forms of carbon by the temperature at which they combust. This capability facilitates the determination of the amount of carbon present on the surface of aluminum sheets or rods, which is relative to the amount of oils or surface modifying treatments.Learn more...
Return